2025 Krone BiG Pack 4 x 4 XC HighSpeed

Highlights • HighSpeed: 20% higher throughputs while maintaining the same density • HDP: Higher bale density – up to 25% heavier bales than from the BiG Pack 1290 • HDP II: Up to 70% higher throughput or up to 10% higher bale densities than from the HDP HighSpeed • Chamber sizes from 3.62 x 2.3 ft to 3.9 x 4.3 ft • VFS along with electronic baling pressure control for even bale densities • X-Cut and VariCut cutting systems and PreChop for short cutting lengths • Well-proven KRONE knotters for high-density and well-shaped bales • MultiBale system packs up to nine small bales in one single big pack • BaleCollect accumulator runs behind the baler collecting the finished bales as they leave the baler for greater harvest efficiencies and reduced field traffic Big Balers • Chamber sizes from 80 x 70 cm to 120 x 130 cm • X-Cut and VariCut cutting systems and PreChop for short cutting lengths • VFS along with electronic baling pressure control for even bale densities • New KRONE V-knotter system for highly compacted and dimensionally stable bales without snippets • MultiBale system packs up to nine small bales in one single BiG Pack • Up to 70% higher throughput or up to 10% higher bale densities than from the HDP HighSpeed • Bale accumulator mounted directly on the rear of the baler for effective and soil-friendly bale collection KRONE Active Pick-up • Clean work: More power due to 30% higher speed compared to a controlled pick-up • Powered feed roller: For superior performance even in brittle material • Smoother running thanks to camless design • Less wear with 68% fewer moving parts • Maintenance-free and long-lasting KRONE XCut (XC) • 16 blades or 26 blades provide 44 mm theoretical cutting length depending on channel width • The tines have wide, hard-wearing Hardox plates • The blade cassette lowers hydraulically and pulls out like a drawer • The blades are controlled in groups • Lowest power requirement in the market KRONE VariCut (VC) • Up to 51 blades • Variable blade control system • Belt drive and four-star rotor for maximum efficiency • Produces top quality short straw • Easy and convenient to maintain • Extremely highly protected drive train for the highest throughputs on the market KRONE PreChop • Short chop lengths – minimum 21 mm nominal lengths • Adjustable LOC, two selectable counterblades • Defibration effect for added liquid absorption • Mechanical gearbox and hydraulic height control VFS Variable Filling System • Uniform densities courtesy of a multiphase feeding sequence • Pre-compression in the feed chamber for maximum filling • Stable bales even from small swaths • Uniformly compressed bales for higher bale weights • Automatic overload clutch for operating at full performance capacity The Driveline • High inertia and high speeds for a quiet running system • Power transmitted down clutch-protected drive shafts • No shear pins in the drive train for maximum operator comfort • Electronic baling pressure control for even bale densities The Bale Chamber and Running Gear • Massive hydraulic rams for maximum bale densities • Electronic star wheel sensor ensures uniform bale lengths • Tandem axle up to max. 60 km/h or single axle up to 40 km/h • Rigid or caster steer bogie axle KRONE Knotter System • Absolutely reliable – simple twine feeding system • Cleaning by air • Central lubrication provided as standard • Long service life KRONE MultiBale • Up to 9 single bales in one large bale • Bale lengths as required: from 0.30 m to 1.35 m (1' to 4'5") • Simple handling with small bales • BiG performance in the field: Easy handling on the farm The Operator Terminals • High-resolution colour touchscreens • The control units on KRONE BiG Pack big balers are all ISOBUS-compatible • If the KRONE BiG Pack is hitched to an ISOBUS-compatible tractor, you can use the tractor terminal to control the baler BiG Pack HDP II • Up to 70% higher throughputs than the BiG Pack 1290 HDP HighSpeed • Up to 10% higher density than the BiG Pack 1290 HDP HighSpeed • Eight double knotters (KRONE V-knotters) for maximum baling densities without any snippets • Twine boxes lower hydraulically for easy maintenance and refilling • Machine cleaning: KRONE PowerClean – as standard on the BiG Pack 1290 HDP II BaleCollect • Saves time and costs in big baling • Telescoping drawbar for optimum rides • Choice of various patterns of depositing the bales to suit multiple bale handling strategies • Standard and integral weighing system • Efficient and reduced soil compaction Options • Fully integrated moisture sensor in the baling chamber • Fully integrated weighing system in the bale chute • Camera system for safe reversing • Extra twine boxes at the rear Specifications • Chamber width x height (cm): 120 x 130 • Bale length (m): 1.00 - 3.20 • No. of plunger strokes (per min.): 38 • No. of double knotters: 6 (Standard) • Power requirement (kW/hp): 145 / 197