2025 Husqvarna 525HF3S

Reach higher with a truly professional hedge trimmer. The Husqvarna 525HF3S is a powerful fixed pole hedge trimmer with a 26-inch, double-sided cutter bar on a 32-inch shaft. The machine has a robust design, including the commercial-grade gearbox, to withstand the toughest work. Our patented X-Torq® engine means more power and less fuel consumption and emissions compared to conventional engines.

Features

• Low weight: Low weight, good balance, easy to manoeuvre

• Long Cutter Bar: Extend your reach for more comfortable use

• Durable gears: Long life gear components

• Engine position: Exhaust fumes diverted away from the user

• Simple Starting: When the stop switch has been used, it is automatically reset to ON to facilitate the next start.

• Hardened Steel Blades: Optimized edge angle stays sharper longer, increases efficiency and ensures durability

• High power: High power

• Quick Start with Air Purge: Air purge removes air from carburetor and fuel system for easy starting

• Stand alone starter: Easy to service and maintain starter

• Intuitive controls: All controls are designed to be easy to understand and use.

• Metal skid plate: Skid plate for engine protection

Capacity

• Recommended maximum twig diameter: 0.94 in

• Cutting speed: 4,339 cut/min

Engine

• Cylinder displacement: 1.55 cu.inch

• Power output: 1.21 hp

• Fuel tank volume: 17.25 fl oz

• Fuel consumption: 395 g/kWh

• Maximum power speed: 8,500 rpm

• Electrode gap: 0.03 in

• Idling speed: 3,000 rpm

• Spark Plug: NGK BPM8Y

Equipment

• Knife length: 25.59 in

• Teeth opening: 1.18 in

Dimensions

• Length, transportation mode - metric: 192 cm

• Weight: 13.4 lbs

• Full length, including cutting equipment: 75.6 in

• Sound and noise:

• Sound power level, guaranteed (LWA): 105 dB(A)

• Sound pressure level at operators ear: 92 dB(A)

Vibration

• Equivalent vibration level (ahv, eq) rear handle: 2.9 m/s²

• Equivalent vibration level (ahv, eq) front handle: 3.9 m/s²

Transmission

• Gear ratio: 1

Emission

• Exhaust emissions (CO2 EU V): 1,141 g/kWh

NOTES:

Disclaimer: 1Output shaft power: Net power rating as per ISO 8893, at specified RPM 2Exhaust emissions (CO2 EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.

Engine

• Displacement: 1.55 cu. in.

General

• Cutting Length: 25.59 in.

• Weight: 13.4 in.