2025 Husqvarna 525HE3

Husqvarna 525HE3 is a 25cc pole hedge trimmer with a 60cm cutter bar and high knife speed, designed for professional users. With a reach up to 3 meters, 37mm blade pitch and durable 135° angle adjustment this versatile machine is suitable for both tall and low hedges. The engine serves as a counterweight and makes the machine exceptionally well-balanced and comfortable to use. Equipped with rear bumper and intuitive controls for easy starting.

Features

• Powerful and Efficient X-TORQ® Engine: Great power and efficiency

• Smart Start® Technology: Specially-designed engine and starter for easy and fast starting with minimum effort

• Adjustable cutter bar: Adjustable cutter bar for greater versatility

• Simple Starting: When the stop switch has been used, it is automatically reset to ON to facilitate the next start.

• Rear impact guard: Rear impact guard

• Intuitive controls: All controls are designed to be easy to understand and use.

• Stand alone starter: Easy to service and maintain starter

• Transport mode: Cutter bar can be set in transport mode

• Quick Start with Air Purge: Air purge removes air from carburetor and fuel system for easy starting

Capacity

• Cutting speed: 4,400 cut/min

Engine

• Cylinder displacement: 1.55 cu.in (25.4 cm³)

• Power output: 1.34 hp (1 kW)

• Fuel tank volume: 17.25 fl oz

• Fuel consumption: 600 g/kWh

• Maximum power speed: 8,500 rpm

• Idling speed: 3,000 rpm

• Spark Plug: Husqvarna HQT-2

Equipment

• Knife length: 24 in (60 cm)

• Teeth opening: 1.2 in (30 mm)

Dimensions

• Length, transportation mode - metric: 126.6 cm

• Weight: 13 lb (5.9 kg)

• Full length, including cutting equipment: 75.8 in

Sound and Noise

• Sound power level, guaranteed (LWA): 107 dB(A)

• Sound pressure level at operators ear: 96 dB(A)

Transmission

• Gear ratio: 1

Vibration

• Equivalent vibration level (ahv, eq) rear handle: 4.4 m/s²

• Equivalent vibration level (ahv, eq) front handle: 5.6 m/s²

Emission

• Exhaust emissions (CO2 EU V): 1,141 g/kWh

NOTES:

Disclaimer: 1Output shaft power: Net power rating as per ISO 8893, at specified RPM 2Exhaust emissions (CO2 EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.

Engine

• Displacement: 1.55 cu. in. (25.4 cc)

General

• Cutting Length: 24 in (60 cm)

• Weight: 13 lb (5.9 kg)