2025 Husqvarna 522HS75S

A 21.7cc, single-sided hedge trimmer with a 30" cutter bar for trimming jobs. Equipped with a leaf catcher for less clean-up. The comfortable handle with optimized weight distribution and impressively low weight combined with the slim, balanced design and low vibration levels provide excellent handling, while the high capacity, high-speed professional knife blade and impressive power output allows for excellent cutting performance.

Features

• An efficient job starts with a sharp blade: The design of the cutting blades provides efficiency.

• Better result in less time: The leaf catcher simplifies cleaning out fine hedge clippings

• Durable, Tested Materials: Internal gears have been specially designed for long life and tested under tough conditions

• Two-stage air filter: Less cost for service and less engine wear

• Hardened Steel Blades: Optimized edge angle stays sharper longer, increases efficiency and ensures durability

• Simple Starting: When the stop switch has been used, it is automatically reset to ON to facilitate the next start.

• Intuitive choke: The choke is easy to reach and understand

• Low Noise Engine: Specially-designed engine reduces extra noise

Capacity

• Cutting speed: 4,400 cut/min

Engine

• Cylinder displacement: 1.3 cu.in (21.7 cm³)

• Power output: 0.8 hp

• Fuel tank volume: 15.2 fl oz

• Fuel consumption: 620 g/kWh

• Maximum power speed: 7,800 rpm

• Electrode gap: 0.02 in

• Idling speed: 3,000 rpm

• Spark Plug: NGK CMR6A

Equipment

• Knife length: 30 in (75 cm)

• Teeth opening: 1.2 in (30 mm)

Sound and Noise

• Sound power level, guaranteed (LWA): 102 dB(A)

• Sound pressure level at operators ear: 93 dB(A)

Transmission

• Gear ratio: 4.09

Dimensions

• Product size length: 47.7 in (121.2 cm)

• Weight: 11.2 lb (5.1 kg)

Vibration

• Equivalent vibration level (ahv, eq) rear handle: 5.7 m/s²

• Equivalent vibration level (ahv, eq) front handle: 5.8 m/s²

Emission

• Exhaust emissions (CO2 EU V): 1,344 g/kWh

NOTES:

Disclaimer: 1Output shaft power: Net power rating as per ISO 8893, at specified RPM 2Exhaust emissions (CO2 EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.

Engine

• Displacement: 1.3 cu. in. (21.7 cc)

General

• Cutting Length: 30 in (75 cm)

• Weight: 11.2 lb (5.1 kg)