top of page
< Back

2025 Husqvarna 522HD60S

OVERVIEW

Availability: Brochure

Year: 2025

Make: Husqvarna

Model: 522HD60S

PRODUCT DESCRIPTION

A robust, 21.7cc, double-sided hedge trimmer with a 24" cutter bar for trimming jobs. Reliable and durable construction guarantee long maintenance and service intervals. The multi-position handle and low weight provide excellent handling, while the high capacity, professional knife blades, open blade guard and impressive power output allows for high productivity.


Features

  • An efficient job starts with a sharp blade: The design of the cutting blades provides efficiency.

  • Durable, Tested Materials: Internal gears have been specially designed for long life and tested under tough conditions

  • Two-stage air filter: Less cost for service and less engine wear

  • Adjustable Rear Handle: Multiple handle positions makes hedge cutting easy and comfortable

  • Simple Starting: When the stop switch has been used, it is automatically reset to ON to facilitate the next start.

  • Intuitive choke: The choke is easy to reach and understand

  • Low Noise Engine: Specially-designed engine reduces extra noise

  • Hardened Steel Blades: Optimized edge angle stays sharper longer, increases efficiency and ensures durability

Capacity

  • Cutting speed: 4,400 cut/min

Engine

  • Cylinder displacement: 1.3 cu.inch (21.7 cm³)

  • Power output: 0.8 hp

  • Fuel tank volume: 15.2 fl oz

  • Fuel consumption: 620 g/kWh

  • Maximum power speed: 7,800 rpm

  • Electrode gap: 0.02 in

  • Idling speed: 3,000 rpm

  • Spark Plug: NGK CMR6A

Equipment

  • Knife length: 24 in (60 cm)

  • Teeth opening: 1.2 in (30 mm)

Dimensions

  • Product size length: 43.5 in (110.5 cm)

  • Weight: 11 lb (5 kg)

  • Sound and noise:

  • Sound power level, guaranteed (LWA): 102 dB(A)

  • Sound pressure level at operators ear: 93 dB(A)

Transmission

  • Gear ratio: 4.09

Vibration

  • Equivalent vibration level (ahv, eq) rear handle: 2.5 m/s²

  • Equivalent vibration level (ahv, eq) front handle: 2.8 m/s²

Emission

  • Exhaust emissions (CO2 EU V): 1,344 g/kWh

NOTES:

Disclaimer: 1Output shaft power: Net power rating as per ISO 8893, at specified RPM 2Exhaust emissions (CO2 EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.


Engine

  • Displacement: 1.3 cu. in. (21.7 cc)

General

  • Cutting Length: 24 in (60 cm)

  • Weight: 11 lb (5 kg)


bottom of page